• Updates in This Version:
• 1.Support setting camera parameters;
• 2.Support auto-sync of camera time;
• 3.Improve the data-reading performance of cameras;
• 4.Optimize the communication with gimbals and drones;
• 5.Fix the bug of failing to connect to camera WiFi when the card is full;
• 6.Fix the bug of no response when reading camera videos and photos;
• 7.Fix the bug that some cameras fail to be automatically launched after the drone is powered on;
• 8.Fix the bug that damaged videos are generated when power is turned off during recording;
• 9.Fix the bug that the files of a certain day may be covered by new files of the day after.

• Upgrade Steps:
• 1. Take out the SD card from the spherical camera and empty the files inside;
• 2. Unzip the firmware package, copy the file ending with “.bin” to the main 
  directory of the SD card.
• 3. Insert the SD card to the spherical camera and turn on the drone power. 
  The camera will then automatically install the firmware with its indicator light flashing.
    Please do not turn off the drone power while installing.
• 4. The updating process will last for around 30s. Press the camera’s power button 
  when you are able to see the transmitted image from the VR goggles, the indicator 
  light of the camera will start flashing. Press the camera’s power button again in 3s, 
  the indicator light will remain on.
• 5. Restart the drone to complete the firmware update. 
•  
• Attention: Please do not turn off the drone or press the camera button when it is installing the firmware.